SeaLINK USB Serial Manual SeaLINK DIN Rail USB Serial Family © Sealevel Systems, Inc. www.sealevel.com SeaLINK DIN Rail USB Serial Manual

Dip Switches (continued) RS-485 is ideal for multi-drop or network environments. RS-485 requires a tri-state driver that will allow the electrical pre

RS-422/485 Products Items# 2112, 2212 Dip switches on SeaLINK USB RS-422/485 serial adapters provide the ability to communicate with RS-422 or RS-485

Dip Switches (continued) RS-485 is ideal for multi-drop or network environments. RS-485 requires a tri-state driver that will allow the electrical pre

RS-232 Products Items# 2111, 2211 SeaLINK RS-232 only serial devices do not require any hardware settings and the enclosures should not be opened. A

Software Installation Instructions Windows 98/ME/2000/XP/Vista™ Operating Systems Do not connect the device to a USB port until the software is insta

Physical Installation SeaLINK USB serial adapters can be connected to any spare USB port. Do not connect the device to a USB port until the software

Connector Pin Assignments RS-232 (DB9 Male) This pin out covers the following products: 2109, 2111, 2113, 2209, 2211, and 2213 Pin # Signal Name

Mounting Options DIN Rail Mounting SeaLINK USB serial adapters ship ready for mounting on DIN rail. A small, rugged plastic clip (shown below) is inc

Technical Specifications Power Requirements Part# Power Requirement 2109 2111 +5VDC @ 100mA 2112 2113 2209 2211 2212 +5VDC @ 200mA 2213 +5VDC @ 300

Appendix A - Troubleshooting Sealevel Software is supplied with the Sealevel Systems adapter and may be used in the troubleshooting procedures. Using

Table of Contents INTRODUCTION...

Appendix B - How To Get Assistance Begin by reading through the Trouble Shooting Guide in Appendix A. If assistance is still needed please see below.

Appendix C – Electrical Interface RS-232 Quite possibly the most widely used communication standard is RS-232. This implementation has been defined an

Appendix D - Asynchronous Communications Serial data communications implies that individual bits of a character are transmitted consecutively to a rec

Appendix E - Silk Screen © Sealevel Systems, Inc. - 21 - SeaLINK DIN Rail USB Serial Manual

Appendix F - Compliance Notices Federal Communications Commission Statement FCC - This equipment has been tested and found to comply with the limits f

Warranty Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime Warranty that is standard on all Sealevel manufac

Introduction SeaLINK DIN Rail USB serial interface adapters are the perfect way to add RS-232, RS-422, or RS-485 serial peripherals such as barcode sc

Before You Get Started What’s Included All SeaLINK DIN rail USB serial adapters ship with the following items. If any of these items is missing or dam

Hardware Description SeaLINK USB 1-Port Devices Common Features  Appears as virtual COM port to host machine  Supports data rates to 921.6K bps 

SeaLINK USB 2-Port Devices Common Features  Appears as virtual COM ports to host machine  Supports data rates to 921.6K bps  Innovative SeaLATC

SeaLATCH™ USB SeaLINK USB serial adapters integrate the patent-pending SeaLATCH USB port, which is fully compatible with standard USB cables. When u

SeaLATCH Locking USB Cables SeaLATCH USB Connectors SeaLATCH locking USB cables integrate a small thumbscrew into each USB connector. SeaLATCH USB ca

Hardware Configuration RS-232/422/485 Multi-Interface Products Items# 2109, 2113, 2209, 2213 Dip switches on SeaLINK USB multi-interface serial adapt