Impulse 463N Manual do Utilizador descarregar pdf (Página 64)

©Sealevel Systems, Inc.

SL9049 - 11/2010

SeaI/O Manual

You can now change the Network SSID, Topology, Channel, and Security Settings to match your

wireless network. After making your changes and clicking OK, the device will reboot and take

up to 20 seconds to appear on the network using your new settings. If you change the SSID

and/or network Topology and/or Channel, you‟ll have to reconnect to the SeaI/O module. Close

Ethernet Config for now.

The supported wireless configuration settings are detailed on the following page.

The Network SSID, wireless network channel, and security settings are specific to your

wireless network. Consult your IT department if you are unsure of your wireless network

settings.

Once you change the wireless configuration and click the OK button, the wireless SeaI/O

module will disappear from the Ethernet Config window. The SeaI/O module will now be

configured to work with your wireless network, but will likely be on a different subnet. You

still need to configure the Device Network Settings before the module will work with your

wireless network.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 108 109

Sem comentários

Impulse 463N Manual do Utilizador Página 64