Impulse 463N Manual do Utilizador descarregar pdf (Página 47)

©Sealevel Systems, Inc.

SL9049 - 11/2010

SeaI/O Manual

The “D/A Outputs” tab is useful for manually setting the digital to analog output voltages on

applicable Sealevel I/O devices with D/A channels. A preliminary diagnostics utility (see

following page) has been provided to verify proper hardware functionality.

The D/A outputs of the SeaI/O-470 are factory set for 0-10V. To configure the D/A outputs for

0-5V, you will need to open the enclosure and set the correct jumpers. Refer to the Hardware

Configuration section of this manual for instructions on opening the enclosure and accessing

the correct jumpers.

To adjust a particular channel‟s output voltage, drag the slider until the desired voltage is

displayed in the window on the right side. Also, you may type the desired voltage directly into

the voltage display and then confirm your entry by pressing the „Enter‟ key on your keyboard.

The output voltage will not change until the „Enter‟ key is pressed or you have clicked on

the window anywhere outside of the text entry field.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 108 109

Sem comentários

Impulse 463N Manual do Utilizador Página 47