Impulse 8007 Manual do Utilizador descarregar pdf (Página 9)

- 7 -

REL-32.PCI User Manual

Jumper Setup Options

The common on each port may be tied to ground, 5, or 12 volts. Either side of each

relay may then be tied to the common. The 8007 is shipped with all of the jumpers

necessary for all possible configurations. The jumpers are parked on the B-side and

are inactive until configured by the user. An example configuration is shown below:

Port 4: The common is tied to ground (GND).

The A-side of port-4 relay 3 (K27) is tied to the common.

The B-side of port-4 relay 6 (K30) is tied to the common.

Port 3: The common is tied to ground (GND).

The A-side of port-3 relay 2 (K18) is tied to the common.

The A-side of port-3 relay 5 (K21) is tied to the common.

Port 2: The common is tied to 5 volts.

The B-side of port-2 relay 4 (K12) is tied to the common.

Port 1: The common is tied to 12 volts.

The A-side of port-1 relay 1 (K1) is tied to the common.

The A-side of port-1 relay 8 (K8) is tied to the common.

com

Port 4

GND

12V

1 2 3 4 5 6 7 8

com

Port 2

GND

12V

1 2 3 4 5 6 7 8

com

Port 1

GND

12V

1 2 3 4 5 6 7 8

com

Port 3

GND

12V

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sem comentários

Impulse 8007 Manual do Utilizador Página 9